Now is the time to set up your custom application acres



LOW on fuel
contact
Scott Equity Fuel Services


Sunday, February 23, 2020  
 
Weather |  Futures |  Futures Markets |  Market News |  Headline News |  DTN Ag Headlines |  Crops |  Charts |  Options |  DTN Renewable Fuels |  Farm Life |  Portfolio 
Home
Scott Equity Exchange
Switchboard
Marketplace
Agronomy
My Website
Admin Login
 
- DTN Headline News
America's Best Shops - 3
Wednesday, February 19, 2020 8:19AM CST
By Matthew Wilde
Progressive Farmer Associate Editor

Straight-line winds that reached 90 miles per hour ripped off a large portion of the roof of Blake Reynolds' farm shop on June 28, 2018.

The 32-year-old Indianola, Iowa, farmer and agribusiness owner was starting to outgrow his then 6-year-old shop. Mother Nature dictated he replace it sooner rather than later.

Reynolds and Jeff Thompson, a technician and sales associate with Reynolds Ag Solutions, were inside the shop when the violent storm hit. Thankfully, no one was hurt.

"We lost power, heard a big bang and the roof was gone that quick," Reynolds said. "We got out, and the trusses fell down on top of everything, sucking in the sidewalls. I was in shock."

Only the concrete floor was salvageable of what Reynolds called a nice but flawed building.

Reynolds will never call the storm a blessing, but the young farmer was handed an unexpected shop do-over.

Horizon Buildings, of Drakesville, Iowa, built a shop 81 feet by 168 feet in its place. A 1,200-square-foot showroom was added for Precision Planting displays and customer interaction. Offices and Reynolds' living quarters are attached.

"Now, I can talk to customers without the noise of grinders and air tools in the background," Reynolds said.

Building posts were reinforced, and roof trusses were extended 2 feet beyond the walls and secured with hurricane clips to minimize future wind damage.

With a price tag of nearly $1 million, Reynolds corrected past mistakes and added new amenities to efficiently farm and take care of seed and ag equipment, and repair customers' equipment for decades to come.

"It is my dream shop," Reynolds said.

BIGGER, BETTER

The new shop is 5,100 square feet larger than the old one and a foot taller (20-foot ceilings). The overhead doors are a foot taller, too -- one that's 30 feet by 17 feet and two 16 feet by 17 feet -- which are across from each other for drive-through convenience. A 12-by-12 door was added for forklift and pickup access.

"Equipment isn't going to get any smaller," Reynolds said. "Now, I have room for a combine, semi, a 24-row planter unfolded and a 12-row planter folded. In the winter, that's a big advantage to get work done."

STORAGE

Loft storage space on the building's north end was expanded from 1,600 square feet to 4,800 square feet with pallet shelving. The floor was reinforced to hold 650,000 pounds. This allows the business to keep extra Precision Planting and farm parts on hand.

"I don't want a customer (or me) being down in the field in the spring," Reynolds added.

ENERGY EFFICIENCY

-- Overhead doors are 3 inches thick and insulated.

-- The shop has in-floor heat via a propane boiler. There's forced-air heat and air-conditioning in the showroom, living quarters and offices.

-- Closed-cell spray foam and 25 inches of blown insulation give the shop an R50 rating, doubling the previous shop's rating.

-- All lights are LED and on motion detectors.

"Despite the increase in shop size, the electric bill remains about the same," Reynolds said. "Propane use has decreased."

AMENITIES

-- Air circulation was improved for worker comfort with six shop ceiling fans, which are on individual switches and reversible.

-- A break room was added in the loft to provide a comfortable space for lunch and planning meetings. Previously, both were done at a workbench.

-- Wi-Fi coverage improved. Extra signal repeaters were added to eliminate dead spots, which previously plagued employees. Internet access is critical for equipment repair and upgrades.

-- Security cameras monitor the facility.

-- Bulk storage tanks were installed for engine oil, engine coolant and hydraulic fluid. Each has a 50-foot hose reel with electronic metering dispensers.

-- Air lines were placed on the inside of exterior walls instead of on the outside to prevent freezing, unlike the other shop. Plus, enough hose reels were scattered throughout the building for 100% coverage.

-- A 14,000-pound vehicle lift was added for $5,200. It cost half as much as a pit, and it can be covered with plywood to serve as an extra workbench, as needed.

FORWARD THINKING

Earthwork is done to eventually build a 72-by-120 cold storage shed for equipment behind the shop for himself and customers.

"I always look forward," Reynolds said.

**

Editor's Note:

This is the third story in DTN/Progressive Farmer's series on America's Best Shops where growers share their resourceful and innovative ideas for indoor workspaces.

Matthew Wilde can be reached at matt.wilde@dtn.com

Follow him on Twitter @progressivwilde

(ES/ SK)


blog iconDTN Blogs & Forums
DTN Market Matters Blog
Editorial Staff
Friday, February 21, 2020 11:39AM CST
Friday, February 14, 2020 11:12AM CST
Friday, February 7, 2020 11:41AM CST
Technically Speaking
Editorial Staff
Tuesday, February 18, 2020 8:53AM CST
Monday, February 10, 2020 8:24AM CST
Monday, February 3, 2020 8:56AM CST
Fundamentally Speaking
Joel Karlin
DTN Contributing Analyst
Friday, February 21, 2020 8:08AM CST
Wednesday, February 19, 2020 11:04AM CST
Tuesday, February 18, 2020 10:59AM CST
DTN Ag Policy Blog
Chris Clayton
DTN Ag Policy Editor
Friday, February 21, 2020 11:36AM CST
Tuesday, February 18, 2020 8:18AM CST
Thursday, February 13, 2020 8:35AM CST
Minding Ag's Business
Katie Behlinger
Farm Business Editor
Wednesday, February 19, 2020 12:08PM CST
Tuesday, February 11, 2020 1:24PM CST
Friday, January 17, 2020 4:55PM CST
DTN Ag Weather Forum
Bryce Anderson
DTN Ag Meteorologist and DTN Analyst
Friday, February 21, 2020 2:16PM CST
Thursday, February 20, 2020 12:43PM CST
Friday, February 14, 2020 12:33PM CST
DTN Production Blog
Pam Smith
Crops Technology Editor
Thursday, February 13, 2020 11:14AM CST
Friday, January 31, 2020 2:40PM CST
Thursday, January 9, 2020 10:55AM CST
Harrington's Sort & Cull
John Harrington
DTN Livestock Analyst
Monday, February 17, 2020 10:48PM CST
Monday, February 10, 2020 4:00PM CST
Friday, January 31, 2020 1:07PM CST
South America Calling
Editorial Staff
Tuesday, February 11, 2020 5:13PM CST
Tuesday, February 4, 2020 5:18PM CST
Thursday, January 30, 2020 2:52PM CST
An Urban’s Rural View
Urban Lehner
Editor Emeritus
Thursday, February 20, 2020 1:35PM CST
Monday, February 10, 2020 8:59AM CST
Monday, February 3, 2020 9:51AM CST
Machinery Chatter
Dan Miller
Progressive Farmer Senior Editor
Friday, February 14, 2020 2:50PM CST
Thursday, February 6, 2020 4:06PM CST
Monday, January 27, 2020 3:59PM CST
Canadian Markets
Cliff Jamieson
Canadian Grains Analyst
Friday, February 21, 2020 3:21PM CST
Thursday, February 20, 2020 5:49PM CST
Wednesday, February 19, 2020 3:54PM CST
Editor’s Notebook
Greg D. Horstmeier
DTN Editor-in-Chief
Tuesday, December 31, 2019 10:39AM CST
Friday, November 22, 2019 5:37PM CST
Monday, November 11, 2019 2:26PM CST
 
Copyright DTN. All rights reserved. Disclaimer.
Powered By DTN